How to wire the light touch switch

During use, touch the switch lightly to meet the operating force conditions and apply pressure to the switch to perform the opening and closing functions. When the pressure is revoked, the four foot light touch switch will be closed, and the internal structure of the four foot light touch switch relies on metal shrapnel to protect the stress situation, achieving connection and disconnection. This is only one point of the four foot touch switch. If you want to know more information about the four foot touch switch, please continue to read!

In fact, a light touch four foot switch is the same type of switch as the commonly used light touch switch in our daily life. A light touch four foot button switch cannot lock itself during use. However, as long as we press it once, the signal of the four corner switch will undergo a change. But how do the four corners of the touch switch connect and what is its working principle? Below, Zhongyang Switch will explain how to wire the touch switch:

How to connect the four corners of the light touch switch?


The four foot light touch switch cannot lock itself during use, but as long as the user presses it once, the signal of the four corner switch will change once. As for how to connect the four corners of the touch switch, this is very important knowledge for electricians, as follows:


1. Set the multimeter to the diode;


2. Firstly, measure any two legs in the four corners to determine which two corners are conductive and which two corners are disconnected;


3. Press the button, measure any two feet, and then determine which two corners are conductive and which two corners are disconnected;


4. Starting to disconnect, pressing the button on the conductive legs can serve as the two corners for welding.

According to the experience of professionals, direct welding can generally be carried out as long as it is diagonal. It should be noted that the working principle of the button switch is that when the button is pressed, the two patches come close, which means they are conductive; When released, the patch separates, which means it is disconnected.

Working principle of lightly touching the four foot button switch

The working principle of this type of switch is actually similar to that of a regular button switch, consisting of a combination of normally open and normally closed contacts. In a four pin button switch, the normally open contact acts as a circuit when pressure is applied to the normally open contact; When this pressure is lifted, it returns to the original normally closed contact, also known as disconnection. The force of pressure is the action of using our hands to open and close buttons. In summary, the working principle of the four legged button switch is still easy to understand.

In fact, the working principle of a four foot light touch switch is similar to that of a regular button switch, consisting of a combination of normally open and normally closed contacts. In a four legged button switch, the function of the normally open contact is to present a closed state when pressure is applied to the normally open contact; When this pressure is lifted, it returns to the original normally closed contact, also known as disconnection. The force of pressure is the action of using our hands to open and close buttons.